The white LED spot option, supplied with its 220V/12V transformer

• Consumption : 42 watts
• Luminous flux: 2100 lm
• Lifespan: 30,000 h
• To be screwed onto a wall stud (supplied)
• Cable 2×1.5mm² of 2m included
• Only 1 spot per pool is sufficient

The LED spotlight must absolutely be ordered together with the pool because it requires a cut-out in the wood.

The option includes the part to be glued. The knee and PVC pipe are also provided to avoid the need to empty the pool in case of on-site intervention. (Price not comparable to that of the spot alone).

With Led Spot

• Consumption: 42 watts
• Luminous flux: 2100 lm
• Lifespan: 30,000 h
• To be screwed onto a wall stud (supplied)
• Cable 2×1.5mm² of 2m included

Only 1 spot per pool is sufficient

The LED spotlight must absolutely be ordered together with the pool because it requires a cut-out in the wood.

The option includes the part to be glued.
The knee and PVC pipe are also provided to avoid the need to empty the pool in case of on-site intervention. (Price not comparable to that of the spot alone).

Electric box

• Filtration pump programming clock
• Magnetic protection of the pump
• Female side socket with 30mA differential to connect the filtration pump
• Transfo toric 100VA (for white LED projector)
• Stuffing box packing for a better seal
• Ready for a heat pump (connection not controlled by the clock)
• Has 2 free slots to connect a salt electrolysis, pH control or others. (Linked to the clock).
• IP65 protection class

• Filtration pump programming clock
• Magnetic protection of the pump
• Female side socket with 30mA differential to connect the filtration pump
• Transfo toric 100VA (for white LED projector)
• Stuffing box packing for a better seal
• Ready for a heat pump (connection not controlled by the clock)
• Has 2 free slots to connect a salt electrolysis, pH control or others. (Linked to the clock).
• IP65 protection class

There are two types of heat pumps, heat pumps for private swimming pools: the so-called « On / Off » heat pumps and the « Full Inverter ». You can find more information by clicking on the link here:

The shutter has many advantages

It saves water, chemicals and energy, its motorization integrated into the shaft and the blades available in color also make it aesthetic. The safety aspect is not forgotten: Our shutters are approved safety standards NF90-308.

Reduced evaporation

• Reduced heat loss
• Economy of products
• Slowing algae growth
• Reduction of water pollution, reduction of evaporation up to 85% temperature gain of about 5°

CERTIFICATION NF 90-308

Our shutters have been tested by the LNE, they can be installed in such a way as to meet French safety standards NF 90-308 from 2.30m pool width. These standards are considered the strictest in Europe.

Composition of the Kit (excluding blades)

• 2 stainless steel legs + 2 PRN wooden leg trims.
• Automatic limit switch, electrical box with electronic card and transformer, shaft with 120Nm motor, key box.

The “+” of the Component

The shutter was developed with a reputable manufacturer.

It is to be ordered with the pool because we are making a few changes that make the difference. Here are some reasons that have prevailed and that justify its development.

1° Guarantee the compatibility of the cover with the pool.

The additional weight of the shutter on the copings must be taken into account.

Reinforcements of wooden structures are provided under the copings for this purpose.

2° Bring a “plus” at the aesthetic level.

The trims of the shutter feet are of the same species as those of the copings.

The stainless steel feet have been sized to be upholstered and to integrate the key box.

3° To facilitate installation.

We disburse the wood of the copings in order to receive the stainless steel feet. Once the copings have been placed with rigor, the location of the stainless steel feet is determined.

• Chevron structure 35×45 mm + north red pine wall, 22 mm thick groove/groove boards
• Shelter completely autoclaved, class 3
• Double door thickness 22 mm with fittings
• stainless steel nails

Useful dimensions

• Facades : 140 cm
• Depth : 103 cm
• Front height: 124 cm
• Rear height : 114 cm

Bubble cover

The isothermal cover (also called bubble cover) allows you to keep the heat and prevent water evaporation (and therefore also reduce your consumables).

Lightweight, it has the advantage of being easy to handle, especially in combination with a reel.

CAUTION: The isothermal blanket is not a safety blanket. If you have small children or pets, we advise you to opt for a safety cover.

– Thickness 400µ luxury version lined on 4 sides*.

– Anti-oxidant treatment to protect the polyethylene from the chlorine present in the water.

– Polyethylene reinforcement on the entire perimeter (hem) provided with stainless steel eyelets on one width (roller side) and 1 eyelet at the opposite angles.

– Delivered with a protective tarpaulin and 3 rubber bands to be positioned on the cover when it is rolled up.

– Rainwater drainage holes.

Did you know ?

* The planking of the 4 faces allows to keep its cover several seasons. Thanks to this hem, the edges dry out and break less quickly. All good for the environment and your wallet!

There are 4 ranges of safety cover (also called winter covers):

-Those without crossbars for completely buried pools called « Wood ».

-Those with crossbars for completely buried pools called « Wood-Bar ».

-Those without crossbars for above-ground pools over 60cm, called « Wood-up ».

-Those with crossbars for above-ground pools over 60cm, called « woodbar-up ».

(Note that these covers are quite thick and cannot be used with a roller)

Our safety covers meet the NF-P90-308 standard.

The installation must comply with certain requirements to guarantee safety, (example: height of the hooks on the walls for above-ground swimming pools. (Refer to the instructions for use).

Covers with bars are easier to handle thanks to their steering wheel.

In addition to their higher purchase cost, there are higher transport costs (The bars cannot be folded and must be packed. We recommend comparing this offer with above-ground electric shutters, which are very practical. However, the cover bars can be installed on octagonal pools (Eight and Eight Elongated).

Technical characteristics of our safety blankets:

-PVC coated fabric 580gr/m² treated against U.V. and anti-cryptogamic (mushrooms and plants).

– Assembly by high-frequency welding with 6cm welded hem

-Double stainless steel eyelet approximately every 90cm. Securement system supplied (piton-socket or stainless steel fixing hooks).